Akai Portable AC Error Codes and Troubleshooting

Akai Portable Ac Maintenance Dubai

Akai Portable AC Error Codes and Troubleshooting

Before asking for repair or changing unit, please check:

Problems: The unit does not work

Causes: Power supply fault:

  1. Not plug in;
  2. Bad plug or socket;
  3. Fuse broken or wire broken;

Suggest Solutions:

  1. Plug in correctly;
  2. Change the plug or the socket;
  3. Send the unit to service center to change the fuse ;( fuse: 3.15A 250V )

Problems: The unit stop running automatically

Causes: Timer is set or room temperature is lower than set temperature;

Suggest Solutions: Close the TIMER or wait for it to run automatically;

Problems: In cooling mode, no cool air coming out;

Causes: Room temperature is lower than set temperature;

Suggest Solutions: Make the setting temperature lower than the room temperature; if it still does not work, call the local technician for repairing

Problems: Error code “E1” in LED window

Causes: Environment temperature sensor is broken.

Suggest Solutions: Replace the temperature sensor

Problems: Error code “E2” in LED window

Causes: Temperature sensor on the evaporator is broken

Suggest Solutions: Replace the sensor

Problems: Error code “E3” in LED window

Causes: Cooling system malfunction caused by the lack of refrigerant

Suggest Solutions: Contact the local repairing technician directly

Problems: Error code “E4” in LED window the red FULL light is bright

Causes: Water tray is full in the heating mode, but the unit is still working

Suggest Solutions: Empty water in water plate

Safety Cautions

  1. Do not use unit near gas appliance, fires or in the vicinity of flammable liquids.
  2. Do not let children put their fingers into the air outlet to avoid danger.
  3. Do not incline the unit more than 35° while moving the unit.
  4. Do not beat or extrude unit to prevent unit broken, do not vibrate the unit.
  5. Keep the unit two meters away from TV sets or radios to avoid the risk of electromagnetic interface.
  6. Do not use unit with the air outlet too close to walls or cover the outlet to avoid overheating.
  7. Do not use the unit in a very crowded room.
  8. Do not use the unit directly under sunshine to avoid surface color fading.
  9. Do not use the unit in water or near water to avoid leakage of electricity.
  10. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or similar qualified person in order to avoid a hazard.
  11. when the room temperature is higher than 25 degrees, it is better not to use the heating function.

Special Guide Line

  1. Do not incline the unit more than 5° degree, if so, please turn off power supply immediately and ask for advice from your local dealer.
  2. Do not spray insecticide or other chemicals to avoid deformation of plastic case.
  3. The unit, due to its moving feature, it can be moved from room to room and it is different from window type or split type air conditioner. If the unit cannot cool down the room temperature efficiently, it is not the unit’s quality problem. The unit can only work efficiently in certain room area. ( see technical specification )
  4. In order to prolong the unit’s lifetime, please empty the water completely in the water tray at the bottom of the unit while the unit is not going to use for a long period of time.
  5. The unit can drain water automatically. It is not necessary to use the hose to drain the water under the cooling mode because the condenser can evaporate the water.
  6. when turning “on” or “off” the unit under the heating mode, some noise of airflow inside the unit can be heard obviously, this is not a faulty problem, no need to repair.

Contact us

0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published. Required fields are marked *